PLEASE NOTE: The Brass Trim / Frame is protected with a thin Plastic Film. This is a replacement trim / frame for your fireplace opening. It has a 2 inch / 5cm Face with a 2 inch / 5cm RETURN. That goes into the Fireplace Opening. The 16 inch; / 40cm Trim / Frame REQUIRES a 16.5 inch / 42cm x 22.5 inch; / 57cm Opening it then leaves a Hole 16″ / 40cm Wide x 22 inch; / 56cm High. External Measurements are 20 inch; / 50cm wide x 24 inch / 60cm high. It is suitable for a Real Coal / Log Fire and a Gas Inset Tray Fire. If you want this for a Gas fire it is really only suitable for the tray inset type and finishes off the fire opening. It normally does not fit to the fire itself unless you have one of the older type hot box fires. If you are not sure, PLEASE do ask a question to avoid getting the wrong thing. This Trim / Frame. It can be stuck back with fire cement or you can use the lugs.
- Suitable for Open Coal/log Fire.
- Comes with Lugs for fixing.
- For use with older Gas inset tray fires.
- For use with 16 inch / 40cm Standard Fireplace Opening.
- Please read desciption for Opening Sizes REQUIRED.